Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Print Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3 Upgrade 3D Printer Print Size 8.66×8.66×9.84 inch
Original price was: $268.99.$33.99Current price is: $33.99.
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Creality Ender 3 V3 SE 3D Printer 250mm/s Speed Merchant Video
Creality Ender 3 V3 SE 3D Printer 250mm/s Printing Speed Upgrade Auto Leveling 
250mm/s High-speed Printing
Creality Ender 3 V3 SE 3D Printer supports a maximum printing speed of 250mm/s. The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
Quick Assembly & Easy to Use
Preassembly has solved those hassles and worries of parts assembly, ender-3 v3 se 3d printer only takes 3 steps to complete the assembe the 3d printers, it only takes 20 minutes from the unpacking to the first printing.
1 “Sprite” Direct Extruder
2 Dual Z-axis Stable Y-axis
3 3 Steps Assembly
4 Auto-Load Filament
5 Upgrade UI Display
Ender 3 V3 SE Upgrade Performance
Ender-3 V3 SE Product Parameters
Creality 3D Printer and Resin 3D Printer
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars 1,123
4.0 out of 5 stars 1,123
4.0 out of 5 stars 91
3.9 out of 5 stars 76
4.0 out of 5 stars 229
4.0 out of 5 stars 459
Price
$219.00$219.00
$219.00$219.00
—
—
$259.00$259.00
$519.00$519.00
Installation Time
10mins
2 hours
10mins
10mins
10mins
1mins
Max Printing Speed
250mm/s
50mm/s
600mm/s
600mm/s
500mm/s
600mm/s
Print Boat Time
28mins
70mins
13mins
13mins
15mins
13mins
Molding Size
220×220×250mm
220×220×250mm
300x300x300mm
220×220×250mm
220×220×240mm
220*220*250mm
Screen Type
3.2″ Color Knob Screen
Monochrome Screen Rotary Knob
4.3″ IPS Touch Screen
4.3″ IPS Touch Screen
4.3″ Color Touch Screen
4.3″ Color Touch Screen
Printing Consumables
PLA/PETG/ABS/TPU 95A
PLA/PETG/ABS
PLA,TPU(95A),PETG,ABS,PLA-CF
PLA,TPU,PETG,ABS,CF,CR-carbon
PLA/PETG/ABS/TPU 95A/ASA
PLA-CF,PET-CFA,PLA,PETG,PETetc
Printing Method
SD card
TF Card/USB Cable
USB drive,WLAN,Creality Cloud
USB flash drive/LAN/Cloud
USB flash drive/LAN/Cloud
USB drive/WiFi
Filament Runout Sensor
✘
✘
✔
✔
✔
✔
Dual Z-axis/Auto Leveling
✔
✘
✔
✔
✔
✔
Features
Cost-Effective
—
Larger Printing Size
Faster And More Stable
Smarter, Higher Speed Printing
Faster + Powerful Performance
【250mm/s High-speed Printing】Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s² acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
【Powerful “”Sprite”” Direct Extruder】Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded “”Sprite”” full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide
【Worry-free CR Touch Auto Leveling & Strain Sensor】Creality Ender 3 upgraded 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier
【Stable Dual Z-axis & Y-axis Linear Shafts】High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. This creality 3d printer Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time
【Quick Assembly & Easy to Use】Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing
【Creality Official Support Service】Creality provides 12-month after-sales service for the creality ender 3d printer. If you have any question or need support about the creality 3d printer, please contact me via Amazon, we will respond with 24 hours
【Auto Filament Loading & Unloading】Ender 3 V3 SE supports automatic loading and unloading filament function. Tap “Extrude”, and the filament will flow out of the nozzle smoothly. Tap “Retract”, and the filament will exit quickly. So, it is effortless to replace the filament
Tom –
My first 3D printer, it works well and is easy to use
My first 3D printer, and it just worksAfter much comparison shopping I settled on the Creality HI Combo.Arrival and assembly: As a first time 3D printer novice I was pleasantly surprised at how well the printer was packaged.Assembly was straight forward, insert the gantry, secure six screws, connect a few well marked connectors and it was done in probably less than 10 minutes. Adding the CFS was also simple, The only question was which cable went into which port. As it turned out it didn’t matter, but it would have been helpful to eliminate any confusion by providing information on this part. Placement of the CFS feeder also left a little too much to imagination. If I were to do it again, I would place the part a little lower on the side of the gantry (with the boudin tube coming out about mid point on the gantry). Overall a very sturdy piece of equipment.First startup: Turning on the printer and waiting for it to go through its initial startup process was fairly lengthy (I can only guess because I have no previous printer for comparison) but since it is only a one time event, it is what it is. The only issue was the printer runs through its complete diagnostics, then goes out to look for any updates. Of course it finds an update, installs it and then because it is updated it goes through the complete diagnostics a second time. I would think it would look for updates first then run diagnostics just once (It is a new toy and I was anxious to start playing).First run: I dispensed with running the standard tug boat test and proceeded directly to printing things I would actually use.Creality Print Software: I have no other slicer to make comparison, however I find the slicer fairly easy to work with, though not fully intuitive. There are many features and options to customize your projects some come with pop ups that briefly describe what the feature does, some are more cryptic, maybe it is just because I am new to the hobby. Some features have no pop up instructions, so I will just leave them at the default until I am more knowledgeable.2 weeks of use: over the past two weeks I have printed 36 projects. The shortest was 8:13, and the longest was 8:18:27, with a total run time for all projects at 52:54:51. I printed 14 multicolor projects all with no errors or failures. The only change I made to the default settings was to change the layer height from 0.2mm to 0.12mm. This makes very nice prints with no apparent layer lines.Materials used for my projects: As a new comer I have only been using Creality filaments. Mostly Hyper-PLA, but also CR-Silk, and CR-PLA.Summary: As a new hobbiest, I am pleased with this purchase I find the addition of the CFS combo makes this a pleasure to operate. I would purchase this again , and would recommend it to others. My only issue is I would like Creality to provide a comprehensive user manual to include recommendations on maintenance and service items that I need to do to maintain the printer. This could be a PDF on their web site. Also I have not been able to figure out how to register the printer with Creality.
North East Indiana Tree Care Assoc –
K1 SE
I bought this K1 SE after literally months of working with Creality support on problems with my Ender 3 V3 SE, and it has been perfect so far for my purpose of producing engineered part assemblies. The frame is gusseted and square, the hot bed is flat and the speed, ease of use and production quality are surprising given the price point. You’re best off using this with Creality Print 6.3 to unlock all the features of the machine. It can also be rooted (voids warranty) for use with Mainsail and Fluidd. My K1 SE took a few prints before it really started performing well, giving dimensionally accurate prints with nice surface quality. The HyperPLA filament spool that comes with the machine doesn’t seem to perform as well as Creality PLA, and some temperature and speed tuning will be necessary, as with any precision tool being set up in a new environment would require. Also, there are no instructions for use, but DO NOT use the “metal grease” or “thermal grease” that comes with the tool kit to lubricate the X axis rails. Those are only for the Y and Z axis rails and lead screws and hot end to be used sparingly during regular maintenance.If you have to deal with customer support, keep in mind they have no clue how much you know, and will need to start with basic troubleshooting, so be kind and patient because it is a process and the time and language differences can make it seem slow. They will help you if you document your issues with videos and precise descriptions of the problems and when they occur. Just be patient and respectful and you will get great support. Keep in mind, they don’t have a service center for warranty repairs, so it’s all DIY repairs, but they will send you new parts for free. It is not their policy to exchange or return machines, so temper your expectations on their support capabilities. They gave me a significant discount on this K1 when all attempts to fix my Ender failed.
Pedro Lucas –
Impressora muito boa e rápida, não deu nenhum erro de impressão e tem ótima qualidade de impressao
JWB –
Makkelijk te installeren. Zorg wel dat je als je alles weer in elkaar zet de x-as waterpas vast zet, dit voorkomt problemen met het bed.
andrew san –
indispensabile per una stampa precisa e perfetta! senza il 2 motore non e’ possibile avere un ottima precisione nella stampa e a lungo andare si sforza troppo il primo motore/supporto verticale, inoltre si rischia di dover risettare spesso la stampante. ormai sono piu’ di 2 anni che l’ho montata.
Anis –
Excellent product but requires attention.
JCRG –
Muy buen producto, al principio me costó trabajo sincronizar la Creality HI con la unidad CFS…. Pero después todo ha trabajado de maravilla