Creality K1C 3D Printer, 600mm/s High-Speed Auto Leveling Clog-Free Robust Direct Extruder K1 SE Upgraded 3D Printer with AI Camera 300°C Printing Silent Mode Support Carbon Fiber Filaments
Original price was: $599.00.$84.99Current price is: $84.99.
Product description
Creality K1C 3D Printer 600mm/s High-Speed Auto Leveling with AI Camera
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. hero-video Merchant Video
Creality K1C 3D Printer Upgrade Performance 
Clog-free Robust Direct Extruder
Creality K1C 3D Printer equips a clog-free robust direct extrude, enhanced with a bolster spring and a ball plunger.It forms a strong grip, enhanced reliability that won’t slacken off.
Make Use of Carbon Fiber Filaments
Creality K1C is an upgraded version of Creality K1 and K1 Max, with more powerful functions, which can prints well with high-temp and wear-resistant PLA-CF, PA-CF, PET-CF, ASA, etc. K1C 3d printer is suitable for carbon fiber 3d printing.
1 600mm/s High Speed
2 Auto Calibration Leveling
3 Robust Direct Extruder
4 Superb Software Ecosystem
5 Creality OS & Software
K1C Both More Powerful Performance More Details Optimization
1 K1C Upgrade Detail
2 K1C Product Parameters
3 Creality Cloud Community
4 Support Carbon Fiber
5 Rich Peripherals
Creality 3D Printer and Resin 3D Printer
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars 459
4.0 out of 5 stars 1,123
4.0 out of 5 stars 1,123
4.0 out of 5 stars 459
3.7 out of 5 stars 42
—
4.6 out of 5 stars 1,716
Price
$519.00$519.00
$249.00$249.00
$219.00$219.00
$419.00$419.00
—
—
$21.99$21.99
Product Dimensions
355*355*480mm
355*355*482mm
420x366x490mm
410*445*577mm
516*582*590mm
333x270x608mm
N/A
Build Volume
220*220*250mm
220*220*250mm
220*220*250mm
300*300*330mm
300*300*320mm
228x128x230mm (6712cm³)
N/A
Max Printing Speed
600mm/s,20000mm/s²
600mm/s,20000mm/s²
250mm/s, 2500mm/s²
600mm/s,20000mm/s²
≤120 mm/s
N/A
N/A
Hotend Temp
s300°C
s300°C
≤260℃
s300°C
up to 260℃
N/A
N/A
Nozzle
Heatbreak Steel-tipped Nozzle
Heatbreak Steel-tipped Nozzle
Copper Nozzle
Quick-swap Nozzle
Copper Nozzle
N/A
N/A
Extruder
Dual-gear Direct Drive
Dual-gear Direct Drive
“Sprite” Direct Extruder
Dual-gear Direct Drive
Bowden Extruder
N/A
N/A
File Transfer
USB Drive. WiFi
USB drive, WiFi
SD Card
USB drive,WLAN,Creality Cloud
Micro USB/TF Card
USB Drive
/
Filaments Supported
Hyper PLA,PETG,TPU,PLA/PA-CF
Hyper PLA/PLA/PETG/TPU
PLA/PETG/ABS/TPU 95A
PLA,TPU(95A),PETG,ABS,PLA-CF
PLA/ABS/PETG/Wood
N/A
N/A
AI Camera
✔
✘
✘
✘
✘
✘
✘
Activated Carbon Filter
✔
✘
✘
✘
✘
✘
✘
AI LiDAR
✘
✘
✘
✘
✘
✘
✘
【CoreXY, 12X Super Fast】Creality K1C 3D Printer inherits the lightweight and agile CoreXY system of K1, Max 600mm/s speed and 20000mm/s² acceleration.It can maintain print quality while printing at high speed, it is 12 times faster than the other normal 3d printer.
【Clog-free Direct Extruder & Tri-metal “Unicorn” Nozzle】Creality K1C is an upgraded version of K1 SE, K1 and K1 Max. It has more powerful functions and supports printing carbon fiber filaments. K1C 3d printer equips a clog-free robust direct extrude, enhanced with a bolster spring and a ball plunger.It forms a strong grip, enhanced reliability that won’t slacken off. Steel-tipped copper nozzle integrated with a titanium alloy heatbreak.It is free of clogs and can be swapped quickly.
【Hands-free Auto Calibratio Leveling & Dynamic Balancing for Reduced Vibration】Just give a single tap, and the auto-calibration gets leveling and everything ready for you with smart sensors. The weight of printhead fans is dynamically balanced so they are less likely to wobble, minimizing ringing or ghosting.
【K1C with AI Camera】K1C is equipped with an AI camera as standard. It can always monitor whether there are foreign objects or malfunctions during the printing process. and enables real-time monitoring, time-lapse photography functions.
【Carbon Fiber Reinforced & Filaments Well Supported】K1C features a enclosed chamber design, 300°C hotend and hardened steel nozzle tip. K1C can prints well with high-temp and wear-resistant PLA-CF, PA-CF, PET-CF, ASA, etc, K1C is suitable for carbon fiber 3d printing.
【Long-lasting Purification & Silent Mode ≤45dB】Air purification system uses activated carbon bags to effectively purify odors and particles produced by melting consumables. During the printing, you can switch to silent mode with one click, which can reduce noise to 45dB without affecting work or rest.
【Creality OS & Superb Software Ecosystem】Creallty OS based on Kipper, powerful, completely open source, support for custom optimization. Creality Print slicing software support for intelligent cooling, pumpback optimization, seedling tree support, but also to facilitate the user remote control of multiple printers.
【Creality Official Support Service】Creality provides 12-month after-sales service for the creality 3d printer. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours
Randomguy –
Good quality out of the box!
Really nice printer… I’ve been using it for a couple weeks now and printed many things… The best thing to do is to get a dryer along with the 3d printer… It will improve your prints greatly. Also learning to fines the settings helped a lot. I saw a big difference in PETG print quality just changing the temp of the hot bed from 57C to 56C…I recommend downloading other peoples 3d modles from online sources like [Printable.com, makerworld.com or thangs.com] for the door hinges, front plate, exhaust fan upgrades and (riser plates (if you intend on using CF filaments)) to get started and learn about how the cad models work and need to be physically one piece for the Creality Print or Cura to work with them. Most software can only do so much to “repair” models someone might create in Blender… FreeCAD isn’t that great but using TinkerCAD with Blender has shown me some decent results and is completely free. AutoDesks 360 fusion looks nice if you have some cash for softwawre they also have a free trial where you can make 9 editable files with there cloudbased software. I have enjoyed this new device since I’m always looking to fix or upgrade things and this allows for SOOOO much more inventive creativity.It has a setting called [ Silent ] too, which slows the printer down to silent volumes which is very awesome since I live next to persnickety people in apartments. It won’t turn down the “travel” speed that much so the setting will need to be adjusted inside Creality print advanced settings if true silence is needed since it has insanely quick and efficient motors. It has auto leveling/calibrations, Lan and usb connectivity if you don’t trust Wifi and I don’t in apartments. It’s easy enough to mess the prints up let alone having wifi hackers interrupting file transmissions..I’ve heard and seen lid risers are needed to print Carbon Fiber prints due to the angle of the Bowden stock tube… ASA makes a good filament for the risers since its high working temp, rigidness and resistance to chemicals like those emited during prints sometimes. Since starting I haven’t had to do much of anything to make it work soundly (since I haven’t used CF filaments yet) and that is awesome! Make sure to use glue stick. Customer support is responsive for any needs and many videos online to help replace, upgrade, install, and maintain the device.I used the original plastic off the sides of the machine to help create a better seal on the front door (looks ugly but it’s free and came with the machine), this keeps everything nice inside when printing and lowers the dB volume outside. Make sure if you decide to upgrade the back fan that you use a DC24v fan. You can place a piece of active carbon filter where the original fan once was… I also put a 5lbs sand back on the edge of the top of the machine which reduces vibrations and movement of the machine when travel is going fast… Don’t place it in the center or you will scratch the bottom of the plate like I accidentally did… Risers would have stopped that but I haven’t finished them yet…an old tooth brush with either isopropyl alcohol or water works really well to clean the build plate rather than using rags and having to wash them… plus if you do it right you can use the old glue and just make a nice finish with just a little water and effort.
delump –
Good choice for new and old
I have a 3rd gen K1 at another location that I really like. The K1C is about the same, but with some improvements. I really like the nozzle wiping.It’s a really easy printer to use. Right out of the box with the Creality slicer you’re up and running without any issues or failed prints. Highly recommended for a beginner!For more experienced users it’s also a good idea. The higher temp/more challenging filament types print without any major issues.Overall it’s difficult to beat. Price, functionality, printing options all work.
William Delong –
No support, could be broken in the box.
Printer is ok. Had issues right out of box. Had to replace heat sink. After that maybe 5 min into first print, had to replace extruder. No help from Creality. Their after-sale support is almost none existent. I told them about the problem and having to replace 2 of the parts basically right out of the box, and nothing. No reimbursement for my expenses, not willing to send items I had to replace, nothing.But if your calling and need help making a purchase, they line up to help. But once you bought one, all that support is gone faster than ice cream at a #&| camp.
James –
Big improvement over my old CR10.
I have bought and used Creality products for years. My CR10 V3 plus was starting to show it’s age so I ordered this Ender 3 V3. I am impressed with the software, speed and print quality. This thing is so fast and quiet when compared to my old CR10! Use the online assembly instructions, your eyes will thank you for it.
Mihai –
Awesome Machine
I have been having a great time printing on this for the past six months. I am usually bad with electronic but this was super easy to set up. I have had no major issues with using the printer, other than a singke clog. It also very durable. The noise level is fairly quiet compared to other printers I’ve seen. I would say this is a great option for those who want to learn how to 3D print.The only negative is the smell. sometimes when printing you can smell the melted filamen, so I would suggest using it in a room with good ventilation.
John Sandoval –
Easy, strong, and reliable.
Fantastic!Make sure you use the same branded spool – just runs smoother.Would buy 100 of these if I could.
Jonathon –
Quiet, efficient, trustworthy
I love this printer. The ability to monitor my print when im away from home is incredible. Its easy to start or stop prints when im at work through utilizing the creality app.The self leveling is a game changer and the unicorn nozzle drastically reduces the clogging nozzles. The only time I had a clogged nozzle was when I used a filament without checking its variance. Sothe clog was 100% my fault.The enclosed case makes it much quieter and keeps the heat more consistent especially since I have my set up in my bedroom which stays pretty cold.This printers performance led me to purchase the k2 max and I love that model even more. Creality is a very successful brand when it comes to this flagship series.
Gerardo P. –
Es una bestia! La velocidad de impresión con hyper PLA es impresionante. Excelente producto
Richie –
Great seller , really good communication.Printer is really good . The model in the pic (groot) is 29.5cm tall , and came out amazing ! No visible layer lines !!I upgraded from an Ender 3 neo v1 and this is soo much better . I just wish it had the same bed levelling and auto Z offset as the Ender 3 v3 se , but the larger build volume more than makes up for it . And the levelling is so much better than the older Enders.So much more reliable than my old printer due to the direct drive.
Jairo Ivo –
Comprei a impressora já a algum tempo e está funcionando perfeitamente, a loja tem um ótimo acompanhamento do produto e durante o processo de entrega recebi vários email da empresa sempre me mantendo informado das condições.É uma impressora incrível, depois da mesa nivelada, ela faz tudo praticamente sozinha, sem que seja nescessário procedimentos mais complexos de manutenção.Em resumo: ótimo produto, ótimo vendedor e estou super satisfeito com a compra.
Marcio Lima –
Embalagem totalmente lacrada, tudo bem embalado.Primeira experiência com impressora 3D e não tive dificuldade para montar e nem para começar a imprimir.Já vem com todas as ferramentas necessárias para montagem.Pelo menos nesse modelo um dos grandes segredos são os ajustes iniciais, como o nivelamento.Documentação que vem no cartão de memória, bem mais detalhada do que a impressão. Ambas as versões possuem o manual em português do Brasil.
Guilherme –
10