Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA ABS Material, Filament Dehydrator, Spool Holder
Original price was: $54.99.$41.99Current price is: $41.99.
Product description
Large Storage
Comgrow Dryer Box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm
Wide Compatibility
Comgrow Dryer Box Works perfectly with all standard filament diameters 1.75mm/2.85mm.
Adjustable Function
3D Printer Filament Dryer displays the humidity and temperature in the dry box in real time. Setting temperature 40°, 45°, 50°C and setting time from 6 hours to 12 hours.
Filament Dryer and Remove Moisture
Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments, keeps the filament dry.
Filament Holder
Please put the filament rolls inside in this direction to make the filament goes out more smoothly.
Sealed storage
The outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.5 out of 5 stars 892
4.5 out of 5 stars 1,742
4.5 out of 5 stars 836
4.6 out of 5 stars 236
4.5 out of 5 stars 1,742
4.5 out of 5 stars 1,742
Price
$22.99$22.99 $19.99$19.99 $13.99$13.99 $9.99$9.99 $16.49$16.49 $18.99$18.99
Material Type
Silk PLA ABS 3D Printer Filament PETG Fiament High Speed Filament Wood Filament TPU
Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
Setting Notes – Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Filament Dryer and Remove Moisture – Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
Real-time Monitoring of Temperature and Humidity – Adjustable temperature range 40°~ 50 °C, the maximum temperature is only 50°C,。setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.When the drying box is working, the sealing hole needs to be opened to allow moisture to drain out. When not in use, the sealing hole needs to be closed to keep the consumables dry.
How to set the filament – Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.If the screen displays two errors, E0 and E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to contact us for replacement.
James M. –
Nice for the price
I was having trouble printing Silk PLA. After much stringing and few few failed prints, now when using the dryer I can print at 190C with no stringing at all and a great finish on my top surface. It seems to warm up the filament take out the moisture and the prints come out amazing.
Major Williams –
Nice piece of kit.
Very nice warmer/dryer. 15 minutes preheating before printing has stopped a lot of annoying issues. Well worth the price. A must have if printing picky filaments.
M. Thompson –
♫♫ How dry I am, I must let everyone know, How Dry I am♫♫
So, basically moisture problems with my filament are a distant memory. This item has multiple settings for temperature and duration. I use it every time I print. Just pop the filament in and let it run for a few minutes to evaporate humidity in the chamber and your off to the races. Do yourself a favor and order some PTFE tubing to run from the dryer box to the printer. No sense in drying your filament only to feed it through wet air to get you your printer.
T. Hall –
Works – but you need to know HOW it works.
Overall I am pleased, but I want to share how this performs.First off, the design changed a little from the pictures, it now has four holes for filament to feed through. Two on the top , as shown, and now two more on the front. All of the holes have silicone seals to close them off, so this is an improvement.Now for the results of my testing. I put a hygrometer inside the case and graphed the results. The unit dries the filament very slowly, so if you have filament that is very moist, you’ll likely need to run this for days to dry it. I averaged around 0.6 to 0.7% per hour (takes about 4 hours before it starts dropping). So it’s slow and steady, which is not a bad thing. Once you have it fairly dry, it will start absorbing moisture again (even if you don’t open the case).In my tests, once the drying cycle completes, the humidity inside the enclosure will start to gradually increase again. Slower than the drying cycle, but steadily increasing. The case has no openings except for filament holes (plugged for testing) and the joint between the base and lid. The drying is accomplished by heating and a small fan that just circulates the air inside the case (it is not vented to the room). So for the humidity to drop the moisture has to be seeping through the joint between the base and the lid. So when the cycle stops, the reverse starts to occur.Final thoughts: I am not pointing this out as a flaw (I still gave it 5 stars), but rather to help others to understand how the device works/behaves. So now I know that the device will need to be run periodically to maintain the target moisture level in the filament AND that the dryer itself is not a good long term storage box. Once filament is dry and won’t be used for a while, it should be stored in something that is air tight to maintain the proper moisture levels.
andrew jenson –
Doesn’t dry filiment.
First, I’d like to say that I got this because I was having issues with moist filament. I could tell because, when printing, I heard a slight popping sound and experienced filament stripping issues. So, I purchased this cheaper unit. When it arrived, I was kind of excited because I could start putting my filament in there, let it dry, and have it directly extrude from it. I set the temperature to 45 degrees Celsius as recommended for PLA and set the time to the maximum, knowing the filament had some moisture in it.It’s a plastic box with a nice locking lid, I’ll give it that. The display is really basic, and it’s small enough to fit in some places. But let’s just say that two days later, after running with two spools of filament in it, the humidity never dropped below 20%. I started reading articles online and found that I might need to crack the hood since there was no way for the moisture to escape. I did that, but it didn’t work at all; the humidity just went up.Now, I’m on my third or fourth day of having this thing with the same roll sitting in it while printing, and the humidity reading is still not dropping below 20%. I still hear the wet popping sound of the filament while it’s printing. Another thing to watch out for is to be careful about what you put the dryer on because the bottom does get hot. Understand that there is a heating block in there, and it will get hot—that’s its job. But just be careful what you put it on so it doesn’t ruin whatever it’s on.I usually only write reviews when something is this bad because, even if it took two days to dry the filament and drop below 20% humidity fully closed, I would say it kind of worked. Since it is cheap, I knew it might take longer than more expensive brands. Another thing, which is not really its fault, is that I was going to return this thing, but my significant other ended up throwing away the box, so now I’m stuck with it. I’ll continue to run it—I don’t know why—in some hope that it will eventually work like it’s supposed to. I might end up just getting some desiccant to throw in there and turning the thing off.
Bryan Veal –
Decent, but I should have spent a little extra money on a different brand.
It seems to heat well, and easy to set time and heat.- Very basic controls, which can be good. But, not granular. Time and temp have very limited presets; hours and temp have few options. Unable to set to price temps or times.- For larger rolls of filament when full it stays on track and straight pretty well on the small rollers. But, when using smaller rolls the roll constantly gets pulled sideways off the track while printing, causing too much tension on the filament and the print to fail if not watched and manually pulled out.- The holes and plastic/rubber plugs for the filament to feed through are not slick enough to allow the filament to pass through smoothly. If this unit is not at the proper straight angle of the printer, it causes too much tension on the filament, which has caused some prints to fail.If wanting to simply heat and dry out the filament, this will work. But, I recommend spending the extra money to buy a different brand if you don’t want your prints to fail.
Excelente –
Muy bueno
De acuerdo a lo especificado
Renato Wiltgen –
Muito pequeno (no bom sentido) aquece rápido e mantém o filamento seco mesmo durante a impressão. Só não é hermético e não serve para armazenar o filamento por muito tempo. Aparentemente (e é como vou usar) vai servir para secar os filamentos antes de guardá-los em uma caixa hermética com dessecante e vou usar para impressões longas, para manter o filamento seco durante horas e horas.Super silencioso, estou tentando comprar outro para meu AMS Lite, mas não encontro mais o mesmo preço!
Crea2n3D –
El precio es increíblemente bueno, las características y materiales del secador son muy de alta calidad, fácil de programar: trabajo desde 6 hasta 48 HRS continuas, y 45 a 55°C.
Plasman –
Un produit utile pour préparer ses bobines de filaments avant une impression 3D.Il est très pratique à utiliser avec deux boutons : un pour allumer l’appareil, l’autre pour les réglages de température et de temps.la température est réglable de 40 à 50 degrés. Le temps de chauffe est réglable de 6 à 12 heures.Un afficheur indique la température et le taux d’humidité à l’intérieur du boitier.
Sergio Gonzalez De Alba –
Funciona bien
David –
J’ai pu utiliser des rouleaux de PLA qui ont plusieurs mois. Le fil perd son côté cassant et ne fait plus de bulles à la buse.Peut être pas miraculeux mais très utile à mon avis.