Anycubic Kobra S1 Combo Multicolor 3D Printer with Anycubic ACE PRO, 4 Multicolor, Drying and Printing at the Same Time, 600mm/s Fast Speed with 320℃ Hotend, Built-in Camera 44dB Quiet 250*250*250mm

Unbelievable for this price!
The value for money is off the charts on this printer. We’ve only had it for 4 days and the poor thing has barely stopped printing. We had so much trouble in the past with our Ender 3 series printer that we had almost given up on 3D printing. Constantly trying to level the bed, adhesion problems, failure after failure on prints. Not this thing. It’s amazing!The auto bed leveling actually does what it says. We haven’t had to make any manual adjustments of any kind.Everything went together easily, and all but a couple of prints have gone flawlessly. The only two the messed up were tiny little buttons that were really poor designs. Adding a support fixed them no problem and they printed fine.The only thing that was a little confusing was the difference bettween wireless and “LAN” printing. If you want to use the software on your PC and control the printer from there – you will need to enable “LAN Printing” even though it’s using wifi. If you want to just print from the marketplace using your phone or what have you, then you have to turn off LAN mode and log back in using the qr code with your phone. It sounds way worse than it is. Once we figured it out it is actually fantastic.I can’t recommend this enough. It is super quiet, super easy to use, and ridiculously fast (you can choose slow, normal, and sport print speeds/qualities). I’m sure there are cons to be had, but we’re super happy with it right now and I can’t think of any yet. I’ll update when I find them 🙂

Not made to last
What could have been a great starter printer is ruined by poor design choices. The whole setup looks user friendly at first. They make components visible and easy to order, but once you start using it, you realize how unimportant those “features” are compared to the massive design flaws they overlooked. The camera is fixed at an angle in the corner and cannot even see the nozzle directly. Why not position it in a way that lets it actually detect real issues instead of mistaking shadows for print problems or completely missing a failed print? The hotend is marketed as quick change, but it’s hidden behind a plastic cover that you have to crush to remove. The ACE dryer cannot feed certain filaments properly due to its flawed feeder design. This issue could have easily been solved by adding feed ports directly on the spool holder, like most other feeding dryers do. The dryer itself is just a heater box with a fan, no moisture sensor, no smart controls, and the default temps are too high. Filament would get jammed because it was stretched by the feeder, making it too thin to feed properly. Worse, to use filaments the ACE can’t feed, you have to power it off and physically remove it from the feed port. There is only a single input, even if you buy the combo that includes the ACE printer. I made it through two Benchy prints before I had my first feeding issue caused by stretched filament. After that came a stuck cutter. I spent two weeks trying to get consistent Benchy prints for calibration. Sometimes a part would start printing, only to fail halfway. Eventually, the extruder clogged completely and stopped feeding. At that point, I had to step back and seriously evaluate whether it was worth investing any more time. I ultimately decided to return it.

Livraison Amazon, top comme d’habitude.Concernant l’imprimante, en 30min elle est fonctionnelle, assemblé très simple et notice en anglais très claire avec les dessins, avec la calibration automatique et le contrôle de jeu plus que succinct (dans le bon sens) pour une première, c’est un régal.Essai d’impression de l’araignée, le requin et le dinosaure articulé (tout juste assez de fil en échantillon pour les 3)Aujourd’hui, premier essai pour refaire une manivelle sur un trépied laser Bosch.Modélisation sous sketchup, slicer prusa avec les paramètres de l’imprimante dans la clé USB fournie.Pas de paramètre compliqué a régler, juste les détails du modèle (remplissage, support,…)Visu sur prusa du rendu d’impression.Import sur l’imprimante avec la carte SD fournie avec l’imprimante, et top la clé USB avec lecteur microSD intégré.Lancement de l’impression, moins de 20min après, ma manivelle est prête. Correspond à la modélisation et aux dimensions dessinés.Pas de mauvaise odeur avec le PLA amazon, imprimante pour moi silencieuse, rapide et très satisfait du résultat d’impression, pour un amateur qui découvre l’impression 3D, aucun regret.Et surtout à un prix très abordable.Tout petit mini détail négatif, le clip présent sur le cablage qui verrouille une 2eme fois le connecteur de la tête d’impression qui ne tient pas beaucoup.Vraiment très content de cet achat ! 👍😊

Der Anycubic Kobra 2 Pro hat mich wirklich begeistert. Ich habe schon einige 3D-Drucker genutzt – vom günstigen Einsteigermodell bis zum semi-professionellen Gerät – aber dieser Drucker kombiniert Benutzerfreundlichkeit mit hoher Präzision und Geschwindigkeit auf eine beeindruckende Art und Weise.Die Einrichtung war kinderleicht. Der Drucker war in wenigen Minuten einsatzbereit, und selbst wer noch nie mit einem 3D-Drucker gearbeitet hat, wird hier keine Hürden haben. Besonders praktisch: Die intuitive Steuerung per Handy-App. Das macht nicht nur Spaß, sondern spart auch Zeit, weil man direkt vom Smartphone aus die Druckjobs starten und überwachen kann.Die Druckqualität ist hervorragend. Bereits der erste Testdruck war überraschend gut – kaum sichtbare Rillen, saubere Ecken und präzise Details. Auch bei höheren Druckgeschwindigkeiten bleibt das Ergebnis stabil und beeindruckend gleichmäßig.Für Anfänger ist er eine hervorragende Wahl, weil die Bedienung sehr einsteigerfreundlich ist. Fortgeschrittene werden sich über die erweiterten Einstellungsmöglichkeiten und die Performance freuen. Ich gebe diesem Gerät ganz klar 5 von 5 Sternen – Preis-Leistung, Qualität und Bedienung sind top!

no product support ,auto-leveling never worked, hotbed abnormal massages arrive frequently, worst first layer ,printer sometimes creating spaghetti or stopping after a certain height ,Print layers keep shifting and ruining the print,print is not properly sticking to the bed, PLA that is coming out is not sticking to the pervious layer.