phrozen Sonic Mighty 12K LCD Resin 3D Printer, 10″ Monochrome LCD, Tabletop 3D Resin Printer with 19*24µm XY Resolution, 8.6*4.8*9.3 Inch Printing Volume for Models, Miniatures and Action Figures
$474.99
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
1 Ultra-high 12K
2 10.1” LCD
3 Extreme Stability
4 Intuitive & User-Friendly
Find 3D Models on PIXUP
Check out pre-supported models or look for ‘Newbie Friendly’ & ‘Phrozen Verified’ tags for success!
Get Printing Parameters
All the recommend parameters are provided. Refer to resin profile spreadsheet on Phrozen website.
1 Find 3D Models
2 Printing Parameters
Sonic Mighty 12K
Phrozen LCD 3D Printer
L13.3xW13.3xH20.3
Printer Size (in)
L13.3xW13.3xH20.3
L8.6xW4.8xH9.3
Printing Volume (in)
L8.6xW4.8xH9.3
31.5 lbs
Printer Weight (lbs)
31.5 lbs
Connectivity – USB
Connectivity – Wifi
Dual Linear Rails
Rail
Dual Linear Rails
19 µm x 24 µm
XY Resolution
28 µm
L13.3xW13.3xH20.3
Printer Size (in)
L13.9xW13.6xH20.4
L8.6xW4.8xH9.3
Printing Volume (in)
L8.8xW5xH9.3
31.5 lbs
Printer Weight (lbs)
39.7 lbs
Connectivity – USB
Connectivity – Wifi
Dual Linear Rails
Rail
Dual Linear Rails
19 µm x 24 µm
XY Resolution
16.8 µm x 24.8 µm
L13.3xW13.3xH20.3
Printer Size (in)
L18.6xW15xH22.3
L8.6xW4.8xH9.3
Printing Volume (in)
L13xW7.3xH11.8
31.5 lbs
Printer Weight (lbs)
57.3 lbs
Connectivity – USB
Connectivity – Wifi
Dual Linear Rails
Rail
Dual Linear Rails
19 µm x 24 µm
XY Resolution
43 µm
L13.3xW13.3xH20.3
Printer Size (in)
L11xW11xH17.3
L8.6xW4.8xH9.3
Printing Volume (in)
L7.9xW4.9xH8.7
31.5 lbs
Printer Weight (lbs)
17.6 lbs
Connectivity – USB
Connectivity – Wifi
Dual Linear Rails
Rail
Dual Linear Rails
19 µm x 24 µm
XY Resolution
52 µm
Sonic Mighty 8K 
Sonic Mighty Revo 
Sonic Mega 8K S 
Sonic Mighty 4K 
Start Your 3D Printing Journey
1 Mighty 12K Solution 2 Choose Your Model 3 3D Printing 4 Rinse the Model 5 Post-Cure the Model
Refined 12K Resolution – With XY resolution of 19 x 24µm, this 12K resin 3D printer enables highly detailed surfaces suitable for intricate models.
High Clarity Printing in a Mid-Size Format – Featuring a 10″ monochrome LCD and 8.6″ x 4.8″ x 9.3″ printing volume for improved output detail and efficiency.
Quiet and Consistent – Advanced motion system and light engine ensure stable print results with lower noise and reduced vibration.
User-Friendly Touchscreen Interface – Optimized layout and clear prompts make resin 3D printing more intuitive for beginners and experienced users alike.
Backed by Phrozen Reliability – Supported by comprehensive guides and community-tested settings for confident printing from day one.
Mike Kondzer –
Great printer for a great price.
I’ve had my Phrozen mini 8k for years now. The print detail is amazing, I have no complaints about that, but of course you trade detail for size or the other way around. That being said, I found I’m not excited to clean prints, so after about a year of cutting into smaller pieces, I went out and bought a Mighty 8k in order to make bigger models with less prints. And now a year after that I’m looking to buy a mega 8K…I’ve had a few issues with failed prints when using any other resin than the Phrozen brand, but I’m pretty sure that has more to do with my ability to dial in my printers settings. It just doesn’t come easy to me.I find every thing is solid about this printer. Good construction, tough, easy to use… that being said I would recommend a screen protector and magnetic build plate just to make cleaning the prints a little less tedious.Great printer for a great price.
Jose Andres –
Solid printer
Solid printer
psychoskin67 –
Excellent printer…for newbie or experienced.
This was my second resin printer/third 3D printer ever purchased and, at the time…the largest. I was very apprehensive when making this purchase, but the online reviews (both on Amazon and elsewhere) helped me make that jump. And I’m glad I did.This printer, out of the box, has been nothing short of a powerhouse. After unboxing, I immediately ran the test print…and it came out nearly perfect. Tweaking and dialing in the settings (there are a LOT of guides out there to help out), the only failures I’ve had were either due to me (poor supports mainly) or temperature-related (which was solved by purchasing a mini heater that fits easily inside the cabinet).The details are outstanding, even when printing smaller parts. And the overall size is second only (for me) to the M3 Max. I use nothing but Phrozen 8K Aqua resins in this machine, and have various settings pre-set/stored according to layer thickness and anti-aliasing.As for slicers…I use both Lychee and Chitubox Pro depending on what tickles me at the moment, and neither have given me any issues whatsoever. I’ve even shut the machine down for weeks on end (usually when I’ve been gone from home or when it simply got too cold that even then heaters couldn’t keep the enclosure warm enough) and it’s never failed to print on restarting and getting it all warmed up and the vat filled.I DID purchase the Mach 5 screen protector for this and ordered a couple extra vats which I then switched out to nFEP (purchased here on Amazon) which allowed me to tweak the time to print even a little bit more (nFEP provides less resistance than the standard FEP film, so lift speeds and height can be reduced a bit to reduce overall print time).Overall, I have not one bad thing to say about this machine at all. The Wash/Cure station – that’s a different story and a reason why I gave Technical Support 4 stars rather than 5. But the printer itself? 100% worth the money!
John A. Schmidt –
So good I am going to buy a second one!
Ease of use: This is NOT my first resin printer, I have two others that have served me well and are still going. It is however, easier to level and keep it’s level. The big display panel and instructions on the thumb drive make it a breeze to get going. The feet on the resin reservoir help to align it to the print bed.Quality of Prints: I mainly print 28mm miniatures and the detail at 8K with a resolution of 0.020 mm is simply awe inspiring! I have seen the prints off of 12K printers and there is NO difference between them (vs. 8K prints) to the naked eye! So get the Mighty 8K and be assured that you are getting the best there is. If you are printing bigger items you will probably want to enable Anti-Aliasing and delve into your particular slicer’s settings.Construction: This printer is solidly put together, nothing shoddy about it.Cons: I wish the resin reservoir had a more pronounced pour groove but it is adequate. On the topic of the reservoir a better fill line would also be appreciated. Both of these are pretty minor gripes in the scheme of things though.Pros: Large build plate, easy to level, and the build plate scraper works like magic!Life Improvements: I went ahead and got the Flexible Build Plate from Wham Bam Systems for the Might 8K and I don’t care WHAT printer I get in the future I am going to get a flexible build plate for it!Final Thoughts: It is a great printer, with a large build plate, that is easy to level and operate!
Good purchase –
Good quality machine
Mirna –
I ordered a Phrozen 3D printer and waited about 15 days for delivery. Unfortunately, it arrived damaged. The strange part is that the box had no damage at all, and the exterior of the machine looked fine. However, when I moved it, I could clearly hear broken glass inside, and the mirror was shattered.There were two main problems:1. The box was only labeled “Heavy,” but not “Fragile” or “Handle with Care.”2. For such an expensive and delicate product, it should have been shipped with better protection and required a delivery signature — neither of which happened.Very disappointing experience for such a costly and fragile machine.
Osvaldo Correia –
I had to return it after almost 30 days trying to leveling the machine, spent 2 litres of resins on this trial, even with their support specialists sent me the instructions to follow still was unsuccessful result, I returned the machine, was a very frustrated experience. No recommend this machine. Hope they improve the leveling system as the other brands already doing so.
Serkis Degirmentas –
Large size but also very fine details, I’m using for jewelry and very happy from the result
Harry –
The manu of this machine said it need ctb file, but neither Chitubox or lychee slicer export Chitubox and lychee slicer can export ctb file file. I spend all day to figure out the way to get ctb file