Premium 3D Print Removal Tool Kit – Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 – Enhanced Version
$14.99
Are you looking for a 3D print removal toolset with Solid, riveted handles that won’t come loose and start spinning, twisting or turning after use? Hardened stainless steel blades that are optimally flexible without being too flimsy and/or getting scratched and gouged by the print bed surface due to their softness? A knife tool with a sharpened front edge (flat bottom) for getting under even the most-adhered prints with ease? Ability to reach into the back under larger parts, sweep across and lever them off , as well as handle smaller, more delicate objects? Durable comfort handles with grips designed for a firm hold that feel good in the hand and look stylish too? Safe, rounded blades easier on your fingers, prints and printer surface? REPTOR 3D Print Removal Tools have been designed with all these aspects in mind.These tools are not your average repurposed painters putty knives with cramp rings that come loose or fall apart before long when used to remove 3D prints! This REPTOR toolset is designed to get even the most stubborn prints off the bed without distorting them or damaging the print bed surface. Both handles have solid rivets in them that will hold the blades in place and will not permit the blades to turn or yield. The knife with its 4.92″ blade and beveled front edge can be used to sweep across and reach into the back under larger parts and provide leverage to pop even a stubborn piece up while the spatula is thin and flexible enough to get under even the most delicate of objects without distorting them. They are the perfect duo – practical and durable, yet comfortable and stylish! Get yours now!
Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!
Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying
Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them
Stylish and useful; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts
Essential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed
Alan M. –
Excellent Set
Recently got a resin 3D printer and used the tool that came with it to remove prints. It worked OK some of the time, but it ended up being a pain to use and I ended up scratching the bed on some of the more difficult prints. Looked around and got these to try. Excellent move on my part! These work incredibly well. They slide easily under the base layer and I can either pop the print off, or just slide the tool around a bit and the print falls off. This is definitely a tool to have. The tool that came with the printer is much thicker and wider, a putty knife in essence. These are thinner and easier to use. Since I have started using these, I have added no new scratches to my bed.If you have a resin printer, you should take a good look at these. I do not think you will be disappointed.
ReviewBeast –
Quality tools, a must for glass beds
Adhesion is a really important part of 3D printing and you need to have good adhesion so that your print remains stable and in place while more material is being added through the printing process. This results in a much neater, more accurate, and higher quality print. The price you pay for this, however, is that sometimes it feels impossible to remove new prints. Technically, you’re supposed to wait for the bed and the print to cool down so that the material has had a chance to contract, allowing you to easily remove the print from the build plate. Trying to remove a print too forcibly and exerting too much force on the object while it is still on the glass plate can damage the build plate clamps/assembly. The key to good 3D prints is all about getting the calibration right and fighting with stuck prints will quickly mess up your setup and require you to readjust and recalibrate far more often.I am always way too impatient to wait for everything to cool down before removing the print. I always want to get the cleanup over with so I can start the next one. That’s where this tool shines. With this, I can easily remove a fresh print while leaving minimal residue on the bed, allowing for a faster cleanup and turnaround on my prints. This won’t matter for most casual users and while I’m a casual user myself, I like to keep my 3D printer off if I’m not using it for safety reasons. Because of that, if I have more than 1 print to run when turning on my printer, I’d prefer to get through them more quickly and minimize the downtime between prints when the unit is just sitting there powered but on standby.This tool has helped me successfully remove hundreds of prints from the glass bed of my 3D printer over and over again. The edge is sharp, making it easy to wedge under the print and apply leverage to the blade and pry it off. The blade feels sturdy and holds it straightness, no matter how much force I have to apply to get a print off. I use the longer one about 95% of the time. Its length allows me to get it as flat as possible against the bed as I try to wedge it, which allows me to use much more force without having to worry that I’ll scratch up the bed. I have an Artillery Sidewinder X1 and these tools are a permanent fixture in my printer side tools. A little pricier than I expected but since they serve such a specific purpose and do it so well, I think they are worth the money.If you like to remove your prints immediately or own a print farm where the turnaround time matters, this tool will be indispensable to your operations.
David –
Must-Have Tools for Anyone with a Resin Printer
These scrapers are some of the most useful tools I’ve ever purchased for 3D Printing. I use them for removing prints from a Resin printer (Elegoo Saturn 4 Pro), and they do the job flawlessly. They are a huge upgrade over the scraper that came with the printer, which was difficult to use because of its sharp corners, thickness, and flimsy blade.These Amervault tools are great for several reasons:- They are designed with rounded tips, so they are far less likely to scratch your build plate.- They are narrow, so you are able to get them underneath individual smaller prints with more precision.- The tips are tapered, sort of like a knife edge (but they’re not sharp!), which makes it easier to slide them between your prints and the build plate.- The metal blades are flexible enough to use at different angles, but sturdy enough that they don’t bend when you’re removing prints.- They are easy to clean (a quick spritz of IPA and a wipe-down with a towel, and you’re done in seconds!)Overall, this 2-piece kit is well-built, does exactly what it’s supposed to do, and is excellent value. After using them regularly for nearly a year, I have virtually no complaints. The only issue I’ve experienced is that some resin residue did get around the larger tool’s handle, which eventually caused the handle to crack and split open after the resin cured– but that’s mainly my fault for not keeping things as clean as I should, and the problem was easily solved by wrapping the handle in some duct tape.
Jim Peters –
Highly recommended
Very nice tools, perform as described making removing prints and do it well.
htsoft –
Usate il giorno stesso del loro arrivo, si sono rivelate comode ed efficaci. Fino al loro arrivo ho adoperato le spatole standard, fornite nella confezione, per staccare le stampe dal piatto della mia stampante a resina. Il risultato è che il piatto stava iniziando a rovinarsi, con queste spatole tutto è risultato più semplice, si sono infilate velocemente sotto il pezzo (grande) staccandolo con pochissimo sforzo. Decisamente consigliate.
Thura –
After using many tools over the years this is my favorite. It is just sharp enough to jam in between the print and the print bed, but not sharp enough to really scratch the print surface. More tools i have bought proclaimed this, but they were all too dull for the job.Still have to see what the long term quality is, but so far it all seems to be of good quality.
FerF –
La recomiendo 100% para los aficionados a la impresion en 3d, ambas herramientas estan diseñadas de forma esquisita, se introducen facilmente entre la pieza y el plato de impresion ya que la punta es muy delgada, pero luego se va haciendo más gruesa para que sin movimientos forzados la pieza se despegue, ademas, ambas herramientas estan pensadas para no tener que introducirlas con ángulos forzados… una poque es muy larga y el mango que es mas grueso queda fuera del plato, y la otra por tener forma de L, asi que las usas paralelamente al plato sin dañarlo.
kg –
High-quality tools that make print removal with both SLA and FDM almost-trivial.
hardy –
Points forts :Outils robustes et durables : Les matériaux de fabrication annoncés comme durables inspirent confiance pour une utilisation répétée.Prise en main confortable : Des utilisateurs mentionnent des manches confortables pour une meilleure maniabilité.Lames tranchantes : Des lames neuves et tranchantes permettent une séparation plus nette des impressions du plateau.Multifonctionnalité : Le kit pouvant inclure un couteau et une spatule, il offre une variété d’outils pour différents types de retrait.Points à prendre en compte avant l’achat :Informations limitées : En raison du manque d’informations car leur site ne fonctionne pas