Matte PLA Filament 1.75mm Matte Green, PLA 3D Printer Filament, 1kg Spool (2.2lbs) PLA Filament, Fit Most FDM 3D Printer

extremely good value PETG!!
Usually I tend to be a little leery of lowest priced products, whatever they might be, but recently I was feeling bold so I bought a couple rolls of the 3dhojor PETG, thinking what the heck, if it doesn’t pan out at least I’m not in too deep.Imagine my surprise to find out that this filament prints cleaner, faster, smoother and more consistently than other brands at double the cost! I compared it directly the other day with Elegoo ‘rapid print’ PETG, printing the same file on the same machine in each filament, and had no trouble at all with the 3dhojor, I loaded it, entered the factory recommended settings, hit print and it produced a flawless model with no re-dos or fussing about with the settings. No stringing, good layer adhesion, no blobs, smooth surfaces, no warping/lifting, awesome first layers.I took the same approach with the Elegoo filament and had to stop/adjust settings/re-start the print 4 times before I achieved an acceptable first layer, and then again when some strange bubbling occured in the fourth layer. Then I had to try to adjust the settings some more to eliminate a rough final layer surface, which was only partly successful.That is the kind of thing that winds up wasting filament, time and money, and so I am now wary of Elegoo filament. But as far as the 3dhojor PETG is concerned, it is now my go-to choice for any PETG project, and I highly recommend it, especially for beginners or non-fiddly inclined makers, as it checks all the boxes.Side note; I have become so weary of constantly having to deal with wet filament! It leaves the factory at 15% and after sitting around in a warehouse, traveling across the ocean and then flying back to Hawaii, it’s at 45%!I dry it, put it in a bag, it sits around for a couple weeks, then when I take it out, it’s wet! So again I have to dry it before I can use it, which is a pain in the behind; I’ve tried the bags that you evacuate too, and after a few days they lose their vacuum, and the filament gets wet. I’ve tried dessicants inside the bags. They just get wet too.( I live in Hawaii, the humidity is brutal year-round ) So finally I said, this has to stop, and designed some simple containers ( PETG ) with a TPU seal and stretchy-clamp dogs to hold the lids down tight against the seal, plus a little plexi window glued in so I can see what’s inside. They keep the moisture out! Finally!! About $10 to make one, and I consider it a good investment.

So easy to print and it looks great!
This is the almond yellow matte filament and it’s amazing! It printed so smoothly using just generic PLA matte settings,The texture is really nice, there are some surface patterns but they look consistent and really look nice. I had no problems with tangles and I got really far into the roll. This print was made up of single color parts and all parts snapped together and fit perfectly. I love the matte look of this too, this was the only color I could find that would match Odie well and the color is nice and the matte finish gives it a more professional look.I’ve ordered seven more rolls and will continue to use this brand,

Good Quality Filament with Consistent Prints The filament prints sm
The filament prints smoothly and has good layer adhesion with minimal stringing. Colors look great and the spool feeds evenly throughout the print. I did notice it requires a slightly higher temperature than standard PLA for the best results, but once dialed in, it performs really well. Overall, a reliable and affordable PLA+ option.

質感は他社PLA +に比べるとマットな質感強度は問題なしプリント中、一度も絡まらなった ← 地味だがかなり重要！！

説明には透明感ありですが　全くなし。記載がおかしいと感じました。