Filament Dryer Box, SH02 Dry Box Filament Sealed Storage Box 3D Printer 2 Spools Holder with PTC Fast Heater, Filament Dehydrator with Touch Screen Compatible with PLA PETG TPU ABS 1.75/2.85mm
Original price was: $79.99.$61.74Current price is: $61.74.
Product description
Filament Dryer Box for 2 Spools: Each filament dryer box is equipped with 2 filament holes which allow PTFE pipes through. The newly designed filament hole position is convenient for 3D printers with different extruder positions on the market. Large capacity of drying 2 rolls of 1KG filament at the same time meets the needs of users to dry a wide range of filaments and two printers at the same time, saving space and time.
360° PTC Fast Heater: Different from SH01, SH02 adopts 150W PTC heater which can heat up faster and are more energy-efficient. Temperature range:40-70℃.The maximum temperature is 70℃.SH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
One Key Set for 9 Types of Filaments: SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.The maximum drying time is 98H.
Intelligent Safety Protection: When PTC temperature exceeds 130°C, it will automatically cut off the heating, and when the PTC temperature drops below 90°C, it will automatically resume heating. If the fan stops rotating during use, an alarm will sound to prompt you to replace the fan to prevent the PTC module from burning out.
Great Sealed Filament Dry Box:We adopts sealing rings to keep sealing.The upper and lower covers are equipped with sealing rings;The consumables outlet hole is equipped with sealing rings;The lower cover and bottom sealing plate are equipped with sealing rings;Multiple protections to prevent consumables from getting wet.
Alex A. –
Shiny and Silky!
So pretty!!! Looks amazing in the lights! Highly suggest any flat surfaces get a smear of Hilburt Curve. Looks amazing with this stuff. Definitely looks shiny/silky in the light just as advertised. Rolls off the spool as expected. I’m printing at 220C, and 200-220C is recommended for this. I haven’t noticed any odd effects or quirks as of yet from this filament. I will update if any build is problematic.
Peter Goloshchapov –
Very happy with the purchase. 👍
It’s really amazing product, the quality built to last, works really good, and the price is very reasonable, very happy with the purchase.
Jeremiah B. –
Best of the Best IMO
COMGROW is by far my favorite Tri-Color filament. I keep at least 3 spoils on hand and have ordered and used approximately 20 rolls. Never had any issues. Spools are wound neatly, no moisture and colors are beautiful. I’ll keep buying this filament and 100% recommend it over anything else. Catch it on sale and it’s an amazing bargain.
Theo –
The burnt titanium “Silk PLA” is slightly sparkly and NOT at all silk like
Though I am a Vine reviwer, I bought this product with my own money. I wish I’d known better (it was the _first_ “silk PLA I’d ever bought) or that I’d payed more attention to the product photos rather than relying the use of the word “silk” in the product description. I was expecting a filament with a silky or metallic sheen, but in reality it seems to be a black PLA with some embedded greenish-blue micro sparkles. I’ve provided three photos, the first comparing this “burnt titanium” filament to a gold silk filament under direct illumination. The second, again under direct illumination, showing four test prints with (from left to right) gold silk, silver-grey silk, this filament, and ordinary black PLA (all, except the burnt titanium, from other brands). In person, the plain black actually looks more silk-like than this filament though neither has nearly as much sheen of the other silk filaments. Directly lit, as in these examples, the sparkly effect is neat; but, with indirect lighting—see the third photo—it’s practically indistinguishable from the plain black PLA.In terms of printing (with a generic Silk PLA profile), right out of the bag it does well, though there was a lot of fine “stringing” between features that are close (≤ 11mm apart—e.g., the cat’s front legs and ears). But the same was true for all the other filaments fresh out of their bags too.
Sean Rogers –
Great filament.
This filament is really great. I have not had it fail during a print job. The quality and colors are really great. I have two printers and use this a lot. When done correctly it holds to the print platform really well. I did cause a couple of issues yet it wasn’t the filaments fault. It prints as expected with the printers that I have. I plan on getting this for a long time to come.
L. Brown –
Don’t put veggies in it.
Works and is convenient
Danielle R –
Amazing colors
This filament (red-blue-yellow) looks amazing! I did a test print with a really small object to see if I got color changes and it looked great so I did a bigger print and that one looks beautiful, and the print quality was great. This dragon had a snap on jaw which snapped in easily and hinged wings that broke free easily.I used default settings for the filament on a Bambu P1S and used a Panda cryogrip plate so I had no adhesion problems. It was a 5 hour print and I had no problems at all.
Jenna E. –
prone to warping, but looks nice
it prints and looks nice. but i found this to by much more finicky than other silks. I had to put retraction down to 2 to void clogging (not uncommon for silks), but i also had to put fan speed down to 35%, and regular fan speed at layer 15, and keep it enclosed to regulate a warm temperature all to avoid warping and delaminating from the build plate. part of that was probably that i was printing a part that had lots of small pieces that touched the plate, but still – with other silks warping is not this much of an issue.
Amazons –
K1Cで使いましたが、エクストルーダーが詰まります。押しも引きも出来なくなります。色合い等は奇麗なのですが、おすすめしません。
Mer –
Works good. I like itFlashed an error once but never again. I use it quite a bit.
F. Angel –
Estas creality de la serie hyper, estoy muy encantado, dejan un acabado bastante limpio, con este tipo de filamento casi ni se notan que los objetos son impresos. Dejan un acabado fino.
Steve G. –
Bought Ender 3 s1 pro, as first printer. Every print that I did using the Creality sample filament never failed. Changed to this filament and had 4 successive fails in a row. As a beginner I won’t use this again and will use Creality filament. Shame as it was bought from the company I bought the printer from.Follow up , The company got in touch to check all was ok, so great customer service. The reel was agreed as faulty and replaced. Can’t fault that ! Thx
O-2 –
問題無く稼働してますフィラメントの乾燥出来ていると思います。音は静かとは言えませんが許容範囲です