Creality K2 Plus Combo 3D Printer, Multi Color Printing with New CFS 600mm/s High-Speed Full Auto-Leveling Dual Al Camera Next-Gen Direct Drive Extruder Large Build Volume 13.78×13.78×13.78inch
Original price was: $1,499.00.$1,199.00Current price is: $1,199.00.
Product description
Creality K2 Plus Combo 3D Printer Multi Color High-Speed Printing with CFS
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Creality K2 Plus Combo 3D Printer Multi Color Merchant Video
1 Multi Color 3D Printing
2 16 Colors 3D Printing
3 Mighty Matrix Frame
4 Noiseless Printing Tech
5 Smart Filament Tech
1 Larger Print Size 2 Sturdy Printer Frame 3 Dual-Core Tech 4 Heated Chamber
1 600mm/s High Speed
2 Perfect Prints Always
3 Pro-level First Layer
4 Auto-Leveling Tech
1 K2 Plus Specifications
2 CFS Specifications
Multi Color Printing with All-new CFS: K2 Plus Combo multi-color flagship printing, exciting for you to combine. With four CFS units hooked together, it is possible to deliver 16-color 3D prints, saving the need for painting afterward. CFS is intelligent with automatic filament selection, switch, and relay. Upon loading an RFID filament, it can read the color and type instantly. When a filament is running out, it can relay with a similar one installed
Larger Size to Meet More Needs: Compared to Creality K2 and K2 Pro, the Creality K2 Plus offers an extraordinary 350*350*350mm large build volume, great for handling larger objects or larger batches, large models don‘t require partitions, and small models are printed in batches more calmly, easily satisfying your ever-expanding 3D printing aspiration
600mm/s High Speed Printing: Creality 3D Printer K2 Plus Combo adopting industry-grade FOC step-servo motors for the XYZ axis and extrusion, Step-servo Motor System 30000mm/s² accelaration, 40mm³/s High-flow and quiet. For a large-format machine, 600mm/s is pretty fast, but that’s not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²
Super Master of Materials: The Creality K2 Plus 3d printer actively maintains a constant temperature of up to 60°C, allowing you to easily print high-end filaments like ASA and PPA. Printed models are warp-resistant and high-strength. High-temp nozzle with hardened steel tip, Supports operating temperatures up to 350°C, easily handling a variety of high-melting-point, wear-resistant engineering filaments
Package Including: 1* Creality K2 Plus 3D Printer + 1* CFS + 4* 500g Hyper RFID Filament (Color: 1x black, 1x white, 1x red and 1x blue)
Dual AI Cameras & Automation: K2 Plus features 18 smart sensors. Everything is automated and closely monitored. It has two AI cameras. One is on the chamber side to watch over spaghetti failure, idling, etc. Another is on the toolhead for flow rate optimization. No more underfeeding and overfeeding. With two Z-axis independently motorized, it can auto-adjust bed tilt before auto leveling
Better Accuracy: The K2 Plus Combo features an innovative “Matrix” frame structure constructed with aerospace-grade aluminum alloy die-casting technology, delivering exceptional overall rigidity that effectively eliminates resonance and deformation during printing for superior precision. Equipped with a dual Z-axis system assisted by four linear rods, this 3D printer ensures extremely steady movement of the print bed during vertical travel, significantly improving print success rates
Rowe –
UPDATE 8/31/25: 1,421 hours of flawless printing! I am in LOVE!
Quick Update with my K2: Since writing the original review below, things have only gotten better! I upgraded the interior cabinet lighting with an LED light kit found here on Amazon. Way better lighting. I also purchased upgraded bed plates with the resin plate being my favorite so far. As you can see with my title update, I have over 1,421 hours of printing on my K2 since purchasing new here on Amazon. My printer is pretty much going non-stop when I am at home. It has been a workhorse and I ensure I take care of all of the maintenance which means cleaning the cabinet, greasing all the rails and Z axis worm drives, replacing filters, keeping the bowden tubes fresh and ensuring all little plastic bits are vacuumed out of the bed at least once a month.My only observed flaw so far is when I need to print ABS projects: The transition from PLA/PETG to ABS is tricky as the ABS has to heat a very specific way. With this in mind, the transition inside the nozzle is not handled very well by the computer therefore I tend to get major nozzle blocks when ABS is introduced. The easy workaround is to have a dedicated ABS nozzle. When I need to print ABS, I simply wait for everything to cool down, I swap in my dedicated ABS nozzle and begin the print. When finished, I wait for everything to cool down and swap in my PLA nozzle. This keeps the jams down to a minimum.I still hold firm to my original review below…I LOVE this printer and I think that Creality has given us an amazing machine to allow imagination to run wild! With proper care and maintenance, this printer will last a long time.ORIGINAL REVIEW Posted 5/2025–In the world of home DIY 3D printing, this category of printer is expensive. It is risky to spend this kind of money for anything, let alone a side-gig or hobby! I had to take the risk because I LOVE the 3D print world and am tired of hand painting my models.After months of research and exploration, I realized I wanted a 3D printer that can print multiple colors. This is the future and make no mistake, the Creality K2 is on the cutting edge of color printing. So with that in mind, we have to look through a lens of growth and opportunity. Creality knows this and sees what the competition is doing so they developed the K1 to meet the needs. That printer was OK but it had many flaws (and so did the competition) Learning from the K1, Creality took it to the next level and developed a printer that is user friendly, prints multi-color models using different brands of filament and has futuristic open-sourced development for growth.After watching hours of YouTube videos where content creators reviewed the K2, it was difficult to plunge in to the K2 as the platform is relatively new. Many reviews showed flaws in the design and software which made me feel as if perhaps the K2 was rushed to market. Well, that was 6 months ago and I figured that Creality has had the opportunity to address the flaws so I dove in and took a chance.BOY HOWDY am I glad I did! My printer has been FLAWLESS and I mean FLAWLESS with printing. I have put 1,500 meters of filament through it and put in over 230 print hours and as of the time of this review, the printer has functioned PERFECTLY.I understand other reviewers are disappointed with broken parts and/or performance. I am not sure if I am lucky or if those other reviewers are simply having trouble with their configurations. Either way, I can attest to the K2’s functionality as a 3D color printer and also to its usability. Right out of the gate, this printer started printing beautifully with no flaws in the models. Compared to my Creality Ender 3V2, this printer is like a Ferrari! Not only is it unbelievably fast, it is also accurate and robust. The textured plate is incredible as my models simply pull away with no effort. I have had 60 print jobs so far and I think I have only needed to clean the bed twice using isopropyl alcohol and a lint free towel.The printer arrived well packaged and with OK instructions. The instructions could use some improvement as the photos in the instructions display the CFS with a different printer, etc. It was easy to work around and understand how to connect the CFS. Otherwise, once the printer came out of the box, assembly was a breeze. Do know that this printer is extremely heavy, even when you remove the items stored inside. Like REALLY heavy. So be sure to have a solid working table to place the machine on when assembling.In my eyes, Creality hit a home run with this machine. The usage has been smooth and predictable. They knew exactly how to make a machine that is “fire and forget”. I feel bad for folks that are getting bum machines but I can say with certainty that my machine is working perfectly and the prints that I have put through it have been tough. The longest print so far has been 23hrs and it came out great (See photo of earth model).The RFID filament system is fantastic. It makes for effortless loading and identification within the machine. I will admit that it seems like a marketing gimmick but I have to say that Creality filament does print smoothly. The HyperPLA prints FAST and wow is it smooth and silky. My other brands of filament print OK but the Creality quality is definitely better.Overall, I am extremely happy with this printer. I have not had one hiccup nor needed to perform parts swapping. I do perform the maintenance of calibration and belt alignment at least every 10 print hours. I also ensured the software and firmware was updated.Once everything was dialed in, it was time to root the machine and add some great software enhancements like Octoeverywhere. Now I can check in on my printer from anywhere in the world with enhanced functionality like a console, 3D bed mesh with calibration tools and much much more. This is where Creality shines: allowing users access to the root system to customize their printer, albeit at their own risk. I was willing to risk it because this is what open-source is all about. The system runs on OpenWRT which makes for a lightweight OS that runs fantastically on the printer ARM driven hardware.I hope not to hit a wall with the machine. At some point, a part will eventually wear out but I feel that their is adequate support in the event something goes wrong. As of now, the printer is fantastic and I hand my hat off to Creality for the K2. It is a fantastic printer.
Father Of 2 Kids –
Bigger built volume with reliability I was looking for
When I first showed interest in 3D printing, the very first name I was introduced to was Creality. I’m incredibly grateful to this company for making 3D printing accessible to everyday people like me. My first printer was the Ender 3 V3 Plus. While it’s a fantastic machine, it didn’t support multicolor printing—so I began looking for an upgrade.Since I started with a large-volume printer, my options were limited. Other competitors either offered smaller build volumes or came with price tags that were simply out of reach. Once again, Creality to the rescue. They clearly understand what customers want. The K2 Plus Combo with the CFS system (for multicolor printing) felt like the perfect upgrade—not cheap, but a great value considering what you get. I had been saving for this, and finally hit that “Buy” button.I read reviews mentioning broken parts during shipping, so I was cautious. But when I unboxed it—wow! I couldn’t believe how well it was packed. The 8 clips securing the shipping box were an intuitive touch. Inside, thick foam surrounded the printer on all sides. No damage at all.There was no assembly needed, just a few screws to remove the CFS unit from the printer chamber. Everything was smartly organized, and the whole unboxing experience felt like the beginning of a creative journey. It even came with four rolls of 500g Hyper PLA filament—so I could jump straight into my first multicolor Benchy!Connecting the CFS was easy. The labels on the PTFE tube and the manual were clear. The CFS recognized the filaments automatically via RFID, so I didn’t have to worry about selecting the wrong type or color.The build quality is rock solid—full metal body, and a bit heavy (I needed help from my wife to lift it onto the table). Once wired and powered on, the printer guided me step-by-step on the touch screen. It took about 13 minutes for the initial leveling and input shaping. I was already in love with the sound it made while calibrating—it sounded powerful and precise.My first multicolor Benchy came out beautifully.This printer is a powerhouse with a large build volume. With the chamber closed, it runs quietly; when open, I enjoy the mechanical sounds—sometimes, that’s exactly what I want to hear. I use PLA only, so I’ve placed it in the same room as my work desk, and it doesn’t interrupt my workflow at all.So far, zero print failures—thanks to its incredible auto-leveling. I haven’t even used the glue stick that came with it. The Creality Print software has excellent filament profiles that just work. The CFS changes colors seamlessly with no bleeding, and the first layer is perfect every time.Let’s talk about the timelapse feature—it’s amazing. I used to rely on a custom setup for my Ender 3 V3 Plus, but this built-in timelapse has taken my content to the next level. My social media engagement has grown because the quality of these timelapses is almost viral-worthy—and I don’t have to lift a finger to make it happen. Even my first Benchy was recorded automatically!The LED light inside the chamber is bright and ideal for timelapses and monitoring prints.I could go on and on, but to sum it up—I’m absolutely satisfied with this printer. From print quality to usability, from multicolor support to content creation tools, this is a dream come true for hobbyists and creators. Creality really nailed it again.
oscar –
Stopped working after 5 prints
It prints great. Great build quality, very easy to use. I was excited to be able to produce such great prints and was showing it off on facebook. Then after it finished my last print the screen went blank and it’s pretty much just a brick now. I googled it and it’s happened to quite a few people. I’m going to contact Creality and see what can be done. Will update with the response.
Cameron Hunt –
Good printer, happy I puchased.
I have had 3 other creality printers and this one works great as do the others. The CFS is great and has been working since I got it. I believe I have about 700ish hours on it and haven’t had any problems. Happy with this purchase and would not hesitate to get another or recommend to others if they were looking for something in this price range.
EC2356 –
You’ll be amazed with this 3D Printer.
Great Value for the Price. It was easy to build and provides superior quality 3D prints. The automatic Bed leveling and Bed Adhesion are superior to my previous 3D printer. It has lots of extra features and functionality. The first one that I received had product damage so make sure you inspect the box when it arrives. Amazon was great in getting me a replacement unit and picked up the damage unit.
dan bernstiel –
Amazing printer
Just wow. Went from an ender 3v2 to an ender 3 S1 pro, now to this printer and it is simply amazing. Better in every possible way. It’s big and heavy but it is so worth the hassle and the cost. Best of all it has been completely hands free this time. Auto lvl has been spot on which was an issue that I had with my S1 pro. I just hit start print and I know it’s going to come out perfectly.
Diego D’Ambra –
La Creality Ender-3 V2 Neo Stampante 3D è un trionfo dell’innovazione nella stampa 3D, offrendo prestazioni avanzate e facilità d’uso sorprendente. La qualità di stampa è impressionante, con dettagli nitidi e alta risoluzione. L’assemblaggio iniziale è intuitivo, adatto sia ai principianti che agli esperti. Le prestazioni di stampa sono stabili e silenziose, garantendo risultati di alta qualità. Il pannello touch screen e la struttura compatta sono caratteristiche che aggiungono valore. Il supporto tecnico di Creality è reattivo e prezioso per affrontare sfide di stampa 3D. In conclusione, la Creality Ender-3 V2 Neo Stampante 3D è un investimento valido per risultati eccezionali di stampa 3D.
Stephane –
Bon produit Bien satisfait!!!
Delda –
super produit et simple d’utilisation!
ChewitsMonster –
Just had to write something (a rare Amazon review for me!) after seeing the reviews saying “it’s not very magnetic” or “it wore out very quickly”, or “it’s too big”.The one I recieved is a genuine Creality mat set (top and bottom that is meant to stick down to the metal bed.) It is the same size as the one I got with my printer (Ender 3 Pro, same bed as all 3’s), it hangs a few mm over each side.It is very magnetic – if not then maybe you haven’t stuck the bottom part down to the bare bed, or quite likely not stuck it the right way round on the bed, turn it 90 degrees and it is very strong. Polarity I guess…It shouldn’t wear out like I have seen in some of the photos, they look like the bed is too high and the nozzle has scored through, or been left hot on it for a long time/filament run out. Just guessing, but have to say the one I recieved is absolutely fine, and no different from the one that came with the printer other than it just has Creality written on it and no Ender logo.
Erik –
I purchased this bed after having issues with the coated glass bed on the Ender 3v2, like cleaning, making the filament stick and such. It really is a game changer even if the fancy glass bed seems like the better option at first glance.- Leveling this bed is a breeze since it does not react to heat to the same extent as the glass bed.- The filament sticks to the surface without any issues- The print pops off quite easy from the flexible bed- The print seems to leave way less (if any) traces from the magnetic bed compared to the glass. Cleaning the latter was always a little effortDid a handful prints now with great results and no lasting effect or traces on the bed. Not sure yet how it will do after many more prints but it feels very convenient to use this bed over the glass bed that comes with the Ender