AMOLEN Silk PLA 3D Printer Filament Bundle, Shiny Dual Color Filament 1.75mm Pack, Multi Color Change 3D Printing Filament for Most FDM 3D Printer, 4 Spools 200g Each

Vibrant filament
After finishing making the tops of 4 different pokeballs with this filament, I can earnestly say that this filament is amazing. It prints with a vibrant and shiny (almost glow like) color. Its durable if you keep your bed heat below 75 (although it is easier to remove from print bed at 50 degrees). I did not notice any stringing and seemed easier on my Ender-3 printer to print (at 210 degrees, compared to 200 for regular PLA). Didnt notice if the print speed was changed because of the filament type, but it is a smoother print than regular PLA.

Great way to try new material/colors
I love these packages. I was struggling to find brown filament that didn’t cost a fortune. I saw this package set (wood, gold, glitter, and marble) and decided to give it a shot. I have bought from this brand before and had good results, so I was optimistic that I would have the same with these. Having used 3 of the 4, I am happy with this purchase.(All printed on an Ender 3 at 200° nozzle and 60° bed). The marble was amazing and my prints came out perfect. The model texture and adhesion were exactly what I wanted. The same goes for wood.The glitter I am skeptical about. The filament itself is VERY fragile and I broke it twice just trying to remove the filament from the hole that keeps the spool from unwinding. Getting it to feed into the machine was just as tough. The prints themselves came out fine. Adhesion was fine. Texture was fine. But the appearance wasn’t what I was expecting. Instead of being shiny and glittery, the filament became almost opaque. It is more of a creamy color with glitter specks in it, as opposed to the clear glitter it began as. It’s not ugly, but it’s not what I expected. I had been looking at trying glitter filament for a while, and had I bought an entire roll, I would have been disappointed. Since this was a single roll out of a 4-pack, I am not so upset.Overall, my prints are coming out nicely. I will definitely continue to buy from this brand.

Pretty, but color transition too long for most prints . Brittle on the roll.
Pics are the blue/green and red/gold rolls. Looks pretty where it’s clean, but where other filaments with my setup I had not problems of this sort, both rolls I’ve tried so far from this sample pack chewed up the filament at the extruder gearTo be fair…ish… these were in a filament dryer that honestly is bad for using while printing. But again, of the four rolls I’ve used in that thing, ONLY these two did this at all. Minimal resistance to line tension and retraction. So far the only filaments I’ve been able to just bend a couple times to break the line or had break while straightening the end to get it into the extruder tubes.Other things to note: This stuff makes STICKY prints. Good for adhesion, but feels like I’m holding a glue stick when holding relatively fresh prints. Makes the results fairly strong too, which is double-edged as getting these supports off has been literally painful. They’re, even at effectively minimum density/size, almost as hard as the print itself and very, very clingy to the print body. I could probably learn what settings I could tweak to mitigate this some, but I’d burn most a roll trying.It’s worth noting the spool size is ~half a normal 1kg spool. Makes sense given these are 200g rolls, but don’t expect the mini-spools to work well in a dryer or any other setups designed for normal rolls. Alone these were jumping and swinging around in my dryer like a jumping bean in hot oil..Bit odd, but my super glue that’s worked on all my PLA stuff so far would not stick to this stuff.To sum up: Prints are pretty and hard when / if you get a print done w/o it falling apart, and get supports off w/o breaking it. Shorter color transition distance would be really nice. An actual complete blending of the two colors the entire roll would probably be much nicer, given the effect this has. The Red/Gold has specks of gold in the red, granted, but w/o the just right lighting one can barely notice even the gold section being gold. Red/gold head is ~26m of material and only the crown of the head is notably gold in normal light (pics are with flash and camera’s auto color correction).The blue/green was disappointing too. Printed the four TMNT boys and got two blue ones and two green ones… none were actually blue/green…. and the green is actually teal.Pretty, neat, but REALLY not worth the price for its quality.

4 carretes en un mismo empaque

It tends to clog the nozzle if I use the recommended hot end settings. Some filaments seems to burn when used on temperatures near the upper limits (wood and marble). It prints beautifully at low temperatures, but keep an eye out for clogs.

Produit bien emballé avec les indications d impression pour chaque filament top!Le gold avec l effet paillette ( on dirait un translucide avec des paillettes or dedans) est du plus bel effet qui change des autres couleurs ors.Le bronze aura été dans mon cas une catastrophe quelque soit la vitesse recommandée 30 50 , meme a 20 pour la 1ere couche , et la température recommandée, ma buse se bouche un moment ou un autre… reussi seulement a imprimer un cube xyz qui bizarrement etait propre.Je compte tester les 2 derniers mais je reste dubitatif surtout pour le bois.C est pour cette raison que je ne mets que 2 etoiles pour le moment en attente de voir les resultats positifs ou négatifs des 2 dernieres couleurs.MAJ : Après avoir discuté avec la compagnie, il s est avéré que la bobine bronze a pu avoir un souci d emballage qui sera remplacé sous peu. J ai pu testé la bobine marbre et bois et la qualité et la couleur sont du plus bel effet!Ps: je vous conseille une buse de 0.6mm pour le bois ( en général pas seulement cette marque ) pour eviter le bouchage de buse.